Red and White Hazard Marking Tape — 2 Inch

ANSI Z535.1 defines safety color codes for floor marking: yellow indicates caution or physical hazards, red signals danger or fire protection equipment, black and yellow marks severe hazards, red and white denotes fire safety boundaries, and green designates first aid or safe conditions. OSHA 29 CFR 1910.144 also specifies red for danger and fire protection markings in industrial facilities.

Red caution tape is used to mark areas of immediate danger, fire protection equipment access zones (extinguishers, hose stations, eyewash stations), and prohibited entry perimeters. Per OSHA 29 CFR 1910.144 and ANSI Z535.1, red identifies danger and fire-related safety equipment. Red and white striped tape specifically highlights hazard boundaries where both danger and no-access messaging must be communicated clearly.

OSHA 29 CFR 1910.22 does not mandate a specific tape width, but 2-inch tape is widely used for standard aisle edges, machine perimeters, and hazard boundary lines. Wider options (3", 4", or 6") are used for high-visibility aisles or areas with heavy traffic. A 2-inch red and white hazard tape is ideal for precise boundary and perimeter marking in most industrial environments.

Yes. Red and white SafetyTac® hazard tape is manufactured to comply with OSHA 29 CFR 1910.22 (Walking-Working Surfaces), OSHA 29 CFR 1910.144 (Color Coding), and ANSI Z535.1 Safety Color Code standards. Using properly colored and durable floor marking tape is a recognized method for achieving OSHA-compliant aisle and hazard boundary marking without painted lines.

Yes. SafetyTac® hazard tape is specifically engineered to withstand forklift and pallet jack traffic. It passes the forklift pivot test, features a beveled edge to reduce lifting and curling, and uses a pressure-sensitive industrial adhesive. The denser 2.0 variant offers even greater resistance for facilities with continuous heavy equipment traffic, chemical exposure, or extreme temperature conditions.

Installation is a simple four-step peel-and-stick process: clean the floor surface, mark your layout line, peel the backing and apply the tape, then weight or roll the tape to secure adhesion. No specialty tools, floor paint, or downtime are required. This makes SafetyTac® an efficient alternative to painted floor markings, allowing facilities to update safety layouts quickly and without disruption.