Yellow and Black Floor Tape

Yellow and black hazard stripe tape signals caution and warns personnel of potential physical hazards, such as forklift zones, machine guarding perimeters, trip hazards, and no-step areas. This color combination is defined by ANSI Z535.1 Safety Color Code and OSHA 29 CFR 1910.144, and is universally recognized in industrial workplaces as a hazard boundary indicator.

Yes. SafetyTac® yellow and black floor tape is engineered to comply with OSHA 29 CFR 1910.22 (Walking-Working Surfaces), OSHA 29 CFR 1910.144 (Color Code for Marking Physical Hazards), and ANSI Z535.1 Safety Color Code. Using compliant hazard stripe tape helps facilities meet workplace safety inspection requirements and reduce liability from floor marking violations.

Yes. SafetyTac® hazard stripe tape is specifically designed and tested to withstand forklift and pallet jack traffic. The SafetyTac® 2.0 variant features a denser material with a more aggressive pressure-sensitive adhesive that passes the forklift pivot test. Beveled edges further resist lifting and curling under repeated heavy equipment passes.

OSHA recommends aisle markings that are clearly visible and at least 2 inches wide. SafetyTac® yellow and black floor tape is available in 2-inch, 3-inch, 4-inch, and 6-inch widths. For primary warehouse aisles and forklift travel lanes, 3-inch or 4-inch tape is most commonly used to ensure high visibility and OSHA compliance.

SafetyTac® floor tape uses a simple peel-and-stick installation process. Clean the floor surface thoroughly, measure and mark your line, peel the backing, apply the tape with firm pressure, and add weight to secure adhesion. No specialty equipment, painting, or facility downtime is required. Installation can typically be completed immediately after application.

SafetyTac® Standard is the baseline industrial-grade floor tape suitable for most warehouse and manufacturing environments. SafetyTac® 2.0 uses denser material and a more aggressive adhesive specifically rated for the most demanding forklift environments, passing the forklift pivot test. SafetyTac® Lean is the lowest-profile option, ideal for facilities requiring a minimal tape thickness for equipment transitions.